Tire installation
1. Please use standard wheels, do not use deformed or damaged wheels.
2. Before combining the wheel rim and tire, please clean the wheel rim and tire first, and there should be no debris left inside.
3. Before combining the wheels and tires. Rubber lubricant or soapy water can be used to wipe the tire lips, wheel rims, and flanges. Do not use oily lubricants.
4. When combining wheels and tires, attention should be paid to the fitting situation. Do not forcefully install them with wind pressure exceeding the normal range to avoid danger.
5. The combination of wheels and tires needs to be operated by specialized personnel in the tire industry, please do not combine them by yourself.
Six tips for tire maintenance
After choosing the tires for your car, it is important to maintain them during use. Among various car accessories, tires are relatively expensive, so it is particularly important to pay attention to the maintenance of car tires.
1. Maintain a safe distance between vehicles while driving at high speeds, avoid unnecessary or frequent braking, and minimize damage to the tires. At the same time, for your own safety, pay attention to the depth of the tire tread. Tires that are close to being worn down have reduced friction with the road surface, resulting in longer braking distances. Do not drive at high speeds.
2. There is a one-to-one correspondence between tire load and air pressure. If the load is too high, it is similar to low air pressure, which can cause tire damage. Frequent use under overload can reduce the service life of tires by 20% -50%; At the same time, incorrect loading methods can also cause uneven tire load, affecting the lifespan of individual tires with excessive load.
3. Air pressure is the life of a tire, and the pressure it is filled with must comply with the standards specified for different types and specifications of tires. Regularly check the tire pressure, as both high and low pressure can cause irregular wear, cracks at the bottom of the grooves, broken cords, delamination of the curtain layer, tire bursting, and other damages; If you want to continue driving at high speeds, the air pressure should be increased by 5% -10% above the standard air pressure; At the same time, the tire will experience an increase in internal air temperature after driving, and it cannot be deflated at this time.
4. It is necessary to timely and appropriately rotate the tires on the vehicle (insisting on checking the tires during the first and second level maintenance of the vehicle), maintain even wear of the tires, and extend their service life; Tires with slightly larger outer diameters should be installed on the outer wheel.
5. Do not use refurbished tires on the front wheels; Try to use tires with vertical stripes for the front wheels and horizontal stripes for the rear wheels.
6. The tire must be replaced when it reaches the wear mark.
Tire Series
Tire Series